| Model |
FC7000MK2-60 |
FC7000MK2-75 |
FC7000MK2-100 |
FC7000MK2-130 |
FC7000MK2-160 |
| CPU |
32-Bit |
| Configuration |
Digital Servo Friction feed with McroGritrollTM drive |
| Max. cut area (expanded mode) |
610 mm x 50m
(24 in x 164 ft ) |
762 mm x 50m
(30 in x 164 ft ) |
1067 mm x 50m
(42 in x 164 ft ) |
1372 mm x 50m
(54 in x 146 ft ) |
1626 mm x 50m
(64 in x 146 ft ) |
| Guaranteed precision cutting area |
590 mm x 15m
(23.2 in x 50 ft ) |
742 mm x 15m
(29.2 in x 50 ft ) |
1047 mm x 15m
(41.2 in x 50 ft ) |
1352 mm x 15m
(53.2 in x 50 ft ) |
1606 mm x 15m
(63.2 in x 50 ft ) |
| Mountable media |
Max. width |
770 mm (30.3 in) |
920 mm (36.2 in) |
1224 mm (48.1 in) |
1529 mm (60.1 in) |
1834 mm (72.2 in) |
| Min. width |
50 mm (2 in) |
| Max. diameter |
200 mm |
| Max. weight |
12 kg (26 lbs) |
12 kg (26 lbs) |
16 kg (35 lbs) |
20 kg (44 lbs) |
24 kg (53 lbs) |
| Max. cross cut area |
730mm (28.7 in) |
901mm (35.5 in) |
1206mm (47.5 in) |
1511mm (59.5 in) |
1765mm (69.5 in) |
| Max. cutting speed (Axial) |
1485 mm / sec (58.5 in/s) at a 45º angle |
| Max. axial acceleration |
4.0 G (39.2 m/s2) |
| Cutting pressure |
20 g to 600 g (0.196 N to 5.88 N) in 48 steps |
| Min. character size *1 |
3 mm (0.125 in) alphanumeric Helvetica med. Font |
| Mechanical resolution |
0.005 mm (0.0002 in) |
| Programmable resolution |
GP-GL : 0.1 / 0.05 / 0.025 / 0.01 mm , HP-GLTM : 0.025 mm |
| Repeatability *2 |
Max. 0.1 mm / 2 m (0.0039 in / 80in) |
| Tools |
Accepts (1) cutting blade, (1) plotting pen, and (1) pouncing tool ; Second penholder (optional) |
| Blade types |
Supersteel (0.9 mm or 1.5 mm), Sapphire(1.5 mm) |
| Pen types |
Water-based fiber-tip, oil-based ballpoint, and disposable ink pens |
| Pouncing tool type |
Requires optional pouncing tool : (PPA33-TP12, 1.2-mm pin diameter) |
| Media types |
Self-adhesive vinyl film, diamond grade, fluorescent film, reflective film, AmberlithTM , RubylithTM , window film,
high-intensity reflective film*3 , paint protection film, up to 0.25 mm tick , sandblast resist rubber up to 1 mm thick, etc. |
| Compatible paper for pouncing |
Regular paper from 0.06 to 0.13 mm thick |
| Standard interfaces |
RS-232C / USB2.0 (Full speed) |
| Buffer memory |
2 MB |
| Command sets |
GP-GL / HP-GLTM *4 |
| LCD Panel |
LCD 20 x 4 - Supports 7 languages: with amber backlight |
| Power supply |
100 to 240 VAC/50 to 60 Hz (Auto switching) |
| Power consumption |
160 VA max. |
| Operating environment |
Temperature: +10ºC to +35ºC |
| Humidity: 35 % to 75 % (non-condensing) |
| Guaranteed accuracy environment |
Temperature: +16ºC to +32ºC |
| Humidity: 35 % to 70 % (non-condensing) |
External dimensions (W x D x H)
including stand *5 |
1110 x 715 x 1210 mm |
1260 x 715 x 1210 mm |
1560 x 715 x 1210 mm |
1860 x 715 x 1210 mm |
2120 x 715 x 1210 mm |
| 43.7 x 47.6 x 28.1 in |
49.6 x 47.6 x 28.1 in |
61.4 x 47.6 x 28.1 in |
73.2 x 47.6 x 28.1 in |
83.5 x 47.6 x 28.1 in |
Weight
including stand |
36 kg (79 lbs) |
39 kg (86 lbs) |
43 kg (95 lbs) |
51 kg (112 lbs) |
59 kg (130 lbs) |
| Compatible OS |
Windows 2000/Windows XP/Windows Vista *6 Macintosh OS 9.X to 10.X |
| Certifications |
UL, cUL, CE marking, RoHS |
*1 CB15UB cutter blade is recommended when cutting characters which size is 10 mm or smaller.
*2 When operated with Graphtec specified media and conditions.
*3 The CB15UA cutter blade and a reinforced backing sheet must be used when cutting high-intensity reflective film.
*4 HP-GL is a registered trademark of Hewlett-Packard Company.
*6 Windows Vista compatible driver/software is available at Graphtec web site (from middle of July, 2007)
FC7000Mk2 Series 
