Uniform DryGuard description ...

The Uniform DryGuard carries a full line of cold laminates in three finishes: gloss, luster or matte. Gloss is normally used when you need to add glossiness to your finished print. Luster, the most popular finish, is used indoors to eliminate glare and provides a very natural look. Matte is used when you want to tone down the finish. Available in 635, 965 & 1397 mm widths.

How to use the Uniform DryGUARD

1. Comes with aluminum collars and hubs for holding your laminate rolls in place. Belt driven take-up reel automatically rolls up liner.	2. You can change laminate rolls in less than a minute.	3. Insert your board and use the two knobs to set height and pressure of top roller.
4. Separate the white liner from laminate. Tape the liner to the core on the take up reel.	5. Place the print on your reusable carrier board and run through the rollers. (The carrier board takes up excess laminate and provides support for the print).	6. After the print exits at the back, cut off the laminate, peel the print off the board and trim. You now have a perfectly laminated print.

Optional Extras
	Stand Steel rolling stand makes your Quikmount mobile and saves table space. Has four castors, two with locks. The top of the stand screws into the Quikmount for complete stability. Height of Quikmount's entry deck, when on the stand, is 940mm. Mounting Quikmount rolls down prints to boards for fast, easy mounting. It also applies double sided adhesives to boards by placing a roll of adhesive on the shaft instead of laminate	Footswitch Footswitch provides hands free control of motor.

Maximum Operating Width	635mm (25”)	965mm (38”)	1397mm (54”)
Maximum Operating Speed	2m (7 feet) per minute
Maximum Laminating Thickness	25.4 millimetres (1 inch)
Dimensions - Width	762mm (30”)	1092mm (42”)	1524mm (60”)
Dimensions - Depth	406 millimetres (16 inches)
Dimensions - Height	1260 millimetres (50 inches)
Operating Table Height	915 millimetres (36 inches)
Voltage	230 V - 50 Hz (110 V - 60 Hz)
Max. Electrical Consumption	1600 Watts
Roller Diameters	63.5mm (2.5")	63.5mm (2.5")	76.2mm (3")
Roller Coverings	Non-Stick Silicone

Book your personal demonstration & let us create a return on investment profile tailored to your business requirements.		We also offer "Uniform Access" our highly competitive business finance solution. To see some of the many benefits of "Uniform Access"
Call our equipment specialist on 01932 568555 or email